TEL: +86-595-82050111
Categories
Contact Us

Quanzhou Jubao Technical Machine Co.,Ltd

Address:Hi-Create Factory, Xidong Industrial Zone, Luoyang, Huian, Quanzhou, Fujian, China

Contact:Crystal Cai

Tel:+86-595-82050111

E-mail:Jubao01@jubao.cc

Knowledge
Home > Knowledge > Content
The use performance of the mould
Oct 24, 2017

1. Small density: Small plastic density, to reduce the weight of mechanical equipment and energy saving is of great significance, especially for vehicles, ships, aircraft, space spacecraft.

2. Higher than strength and stiffness: the absolute strength of plastic is not as high as metal, but the plastic density is small, so the ratio of strength (σb/ρ), stiffness (e/ρ) is quite high. In particular, a variety of high-strength fiber-like, flaky and powder-like metal or non-metallic fillers made of reinforced plastic, its specific strength and stiffness than the metal is higher.

3. Good chemical Stability: Most plastics have good acid, alkali, salt, water and gas performance, under normal conditions, they do not react with these substances.

4. Electrical insulation, insulation, sound performance is good.

5. Wear-resistant and self-lubricating good: plastic friction coefficient small, good wear resistance, good self-lubricating, coupled with high strength, small transmission noise, it can be in the liquid medium, dry or even dry friction conditions to work effectively. It can be made into bearings, gears, cams and pulleys and other machine parts, very suitable for the speed is not high, less load occasions.

6. Strong bonding ability.

7. Molding and coloring performance is good.


  • Contact Us

    Quanzhou Jubao Technical Machine Co.,Ltd

    Address:Hi-Create Factory, Xidong Industrial Zone, Luoyang, Huian, Quanzhou, Fujian, China

    Contact:Crystal Cai

    Tel:+86-595-82050111

    E-mail:Jubao01@jubao.cc

  • Categories
  • Copyright © Quanzhou Jubao Technical Machine Co.,Ltd All Rights Reserved.