TEL: +86-595-82050111
Categories
Contact Us

Quanzhou Jubao Technical Machine Co.,Ltd

Address:Hi-Create Factory, Xidong Industrial Zone, Luoyang, Huian, Quanzhou, Fujian, China

Contact:Crystal Cai

Tel:+86-595-82050111

E-mail:Jubao01@jubao.cc

News
Home > News > Content
Precautions When Using A Polishing Machine
Oct 24, 2017

1. No high-speed polishing machine shall be used if the following conditions are found

Operators are not professionally trained.

The operator has not learned the "safe operation procedure".

The high speed polishing machine is not working properly.

2. Before using high speed polishing machine, we should check the environment.

The operator's hands and feet are removed from the rotating polishing head.

The operator must not step on the power cord or wrap the power cord into the polishing head.

Operators must be safe in their attire.

The polishing area shall not exceed the length of the power cord.

Operators are not allowed to dispose of the handle without authorization. When stopping, the handle must be loosened after the high-speed polishing machine completely stops spinning.

You cannot use polished pads that are sticky with dust and dirt. Too much of the polishing pad can not be cleaned, with timely replacement.

When replacing and installing the polishing pad, the power supply must be cut off.

3. High-speed polishing machine storage

Cut off the power.

Tilt backwards, and the rear wheel is deposited.

shall not be stored outdoors and shall be kept in a dry place.


  • Contact Us

    Quanzhou Jubao Technical Machine Co.,Ltd

    Address:Hi-Create Factory, Xidong Industrial Zone, Luoyang, Huian, Quanzhou, Fujian, China

    Contact:Crystal Cai

    Tel:+86-595-82050111

    E-mail:Jubao01@jubao.cc

  • Categories
  • Copyright © Quanzhou Jubao Technical Machine Co.,Ltd All Rights Reserved.