Gloves as the use of protective equipment on many occasions to get more and more, especially when operating in order to protect the operator's hand, it is widely used gloves, position the cable on rubber device fingerprint gloves, hand print on the gloves dipping glue solution, the need for a glue, mix glue, secondary dipping and a series of actions to flip fingerprint, rubber gloves dipping machine in the process of impregnation needs accurate dip Angle and immersion depth, and need to excess glue drops after impregnation, then swing homogenate and flow flat excess glue drops, however in the oscillating homogenate and flow flat excess glue dripping steps, part of the glue drop fall into the machine or the ground,Therefore, it has a certain impact on the working environment, not only causing waste, but also causing some harm to the workers in the working environment.
Technical implementation elements:
The utility model aims to provide a glove rubber dipping device, which can solve one or more of the existing technical problems mentioned above.
According to the utility model of a rubber glove device, including the guide, it guide the sliding bracket box, solid of support frame described in a number of fingerprint and soak glue tank, described in the box set consists of two parallel support short edge and the fixed connection in short at the edge of the long side of the two, two shorter edges at both ends are equipped with gears, described above, long edge connections with a number of fingerprint described soak glue tank for cone shape, soak glue tank is equipped with lifting device, described in the guide rail by motor driven, described have set liquid trough soak glue tank connection, described the collection tank for the cone, and described with connected to soak glue tank.
The utility model provides a glove rubber dipping device with simple and practical structure. By installing a collecting tank, the rubber on the glove drops to the collecting tank and then falls back from the collecting tank to the soaking tank, avoiding waste, and the rubber drops all drop to the collecting tank to prevent dropping on the machine or the ground and avoid environmental damage.
In some embodiments, one end connected to the collecting tank and the dipping tank is lower than the other end of the collecting tank.It is convenient to dip back into the dip tank.
In some embodiments, the long side is provided with a heating main pipe, and the hand mold is provided with a heating branch pipe, which is connected with the heating main pipe.It can make the rubber on the gloves be heated at the same time, which can save the production time and improve the work efficiency.
In some embodiments, a blower device is arranged above the liquid collecting tank, and the blower device comprises a number of fans, and the fans correspond one to one to the hand mold.Accelerate the drying process.